Installation
38
5.12 Assembling the side cover
The side cover of the Autoloader must be assembled prior to commissioning.
The following figure shows the operating side of the Autoloader:
Fig. 22: Operating side of the Autoloader CS-i/CS-d with side cover
Position
Component
Description
1
Screws on the side cover (4×)
For securing the side cover
2
Side cover
Side cover of the Autoloader
Assemble the side cover as follows:
1. Insert the side cover (
2
) and use the first screw (
1
) to fix it in place.
2. Screw in the remaining side cover screws (
1
).
The side cover has been assembled.
5.13 Establishing the power supply
The power supply is established using the supplied power supply unit.
See
for details of the power supply.
Establish the power supply as follows:
1. Ensure that the assembly steps 5.1 to 5.10 have been carried out.
2. Connect the supplied power supply unit on the back of the Autoloader, see Pos. (
2
) in
”.
3.
Connect the power plug on the power supply unit to the operating company’s power supply.
The Autoloader has been connected to the power supply and can now be commissioned.
2
1
