Installation
37
5.11 Assembling the front cover
The two front covers must be assembled once the Autoloader has been attached to the
analyzer.
The following figure shows the position of the screws on the front cover:
Fig. 21: Mounting the front cover
Position
Component
Description
1
Operating side
Operating side of the Autoloader
2
Bottom cover
Bottom cover with space for the crucible bin
3
Position of screws (7x)
The front cover is secured on the Autoloader by
seven screws
4
Top cover
Top cover with protective hood
Assemble the front cover as follows:
1. First place the bottom cover (
2
) onto the Autoloader (
1
).
2. Secure the bottom cover (
2
) using the screws (
3
).
3. First place the top cover (
4
) onto the Autoloader (1).
3. Secure the top cover (
4
) using the screws (
2
).
The front covers have been assembled.
1
3
2
4
