30
SBC session border controllers
Installation of ventilation units
The device design allows ventilation units replacement even when the terminal is on.
Figure 20 — Ventilation unit in SBC-1000 based on SMG-1016M. Case mounting
Figure 21 — Ventilation unit in SBC-2000 based on SMG-2016. Case mounting
Figure 22 — Ventilation unit in SBC-3000 based on SMG-3016. Case mounting
To remove a ventilation unit, perform the following actions:
1.
Use a screwdriver to remove the screws fixing the ventilation unit to the rear panel.
2.
Carefully pull the unit until it is removed from the case.
3.
Disconnect the unit from the device socket, Figure 23.
