SBC session border controllers
175
Command mode
CONFIG – SWITCH
Example
cntrset sm-port 1/2 1 22 2 1
show cntrset
This command is used to view the queue collector information.
Syntax
show cntrset <SET>
Parameters
<SET> — counter number [0 .. 1].
Command mode
CONFIG – SWITCH
show qos
This command is used to view the priorities assigned to the queues. By default queue priority is 0. The priority value
for the queue is set in the range [0 .. 7], the queue with a priority value of 7 is considered the highest priority.
Syntax
show qos
Parameters
Command contains no arguments.
Command mode
CONFIG – SWITCH
Configuration operation commands
SBC-2000 switch has 2 configuration types:
–
running-config — configuration that is currently active on the device;
–
candidate-config — configuration in which any changes have been made, it will become running-config
after it is applied with the apply command.
View configuration
show running-config
Syntax
show running-config
Parameters
Command contains no arguments.
Command mode
CONFIG – SWITCH