78
SBC session border controllers
Network services –> SNMP (SNMP traps settings)
–
Restart SNMPd
— SNMP client restarts when the button is clicked;
Network services –> SNMP (SNMP traps settings)
–> «Add»
Up to 16 traps can be created. To create, edit or remove trap parameters, use
the following buttons:
–
"Add";
–
«Edit»;
–
«Delete».
–
Type
— SNMP message type (TRAPv1, TRAPv2, INFORM);
–
Community
— password contained in traps;
–
IP-address
— trap recipient IP address;
–
Port
— trap receiver UDP port.
4.1.5.2.4
Retrieving MIB files
In the current firmware version, you can download the current MIB files directly from the device by clicking
the
«Download MIB-files»
button.
4.1.5.3
VPN/PPTP server
Network services –> VPN/PPTP server
VPN/PPTP server settings
–
Enabled —
start the service at startup/reboot;
–
Server address —
IP address that will be reported as
the server address to all connecting PPTP clients;
–
First client address
,
Last client address —
range of IP
addresses assigned to PPTP clients;
–
Network interface —
select the interface to connect
to the VPN/PPTP server;
–
DNS server —
address of the DNS server, which will
be reported to clients;
–
Max clients count —
number of simultaneous client
connections;
–
Enable encryption —
encryption of transmitted data
(must also be enabled on the client);
–
Enable Web, Enable Telnet, Enable SSH
— when
checked, the corresponding management service is
available at the specified interface address;
–
Enable SNMP
— enables SNMP utilization through
the interface;
–
Enable RADIUS
— enables RADIUS protocol
utilization through the interface.