RR-10 wireless signal repeater. User manual
15
2.4 EasyMesh agent mode
When using the RR-10 repeater together with the RG-35 router it is possible to operate in EasyMesh agent
mode.
2.4.1 Connecting to EasyMesh network using WPS button
1. Connect RR-10 to 220V power network using power adapter next to EasyMesh controller (RG-35 router).
Wait until LED start flashing red slowly.
2. Ensure that RG-35 has EasyMesh controller mode enabled. Press the WPS button on RG-35.
3. Press and hold WPS button on RR-10 untill the indicator start flashing green. When repeater is
connected to the Internet, the indicator will light green.
4. The RG-35 web interface will display changes in the EasyMesh network topology:
5. Changing agent name will be available in repeater web interface:
EasyMesh network configuration via Ethernet cable is not available in firmware version 1.2.0.
You have 2 minutes after pressing WPS button on the RG-35 router to press WPS on RR-10 for
successful connection.
