RR-10 wireless signal repeater. User manual
25
•
•
•
•
1.
2.
3.3.3 The «Network» tab
The «Network» tab contains the device's local network settings.
DHCP
– select the operation mode of the device interface;
IP Address
– local IP address of the device. By default
168.0.1
;
Netmask –
the value of LAN subnet mask. By default
255.255.0
;
Default gateway
– IP address of the gateway on the network.
3.3.3.1 Connecting to the access point (router) network through Ethernet
Select «Attain IP address automatically» and click «Apply».
Connect the repeater to the router using an Ethernet cable.
It is recommended to use WPA2 and WPA/WPA2 (Mixed) security modes as the most secure.
The «DHCP server» option is available in the default settings only. After connecting the device to an
access point, this item becomes unavailable.
Please note that if you connect an access point (router) to the network via Ethernet, you will need to
manually configure the extended device network. By default, the extended device network does not
use encryption and password.