Elster TC210, Operating Manual And Installation Instructions

Page: 76 / 79

Temperature-Volume Corrector TC210
76 ELSTER Handel GmbH
Appendix C: Data list
Below all values are listed which as standard cannot be called via the keypad, but instead
only via interface and can also be changed depending on the status of the locks.
Via the interface all values must be accessed by means of the "address". The "address" of
the values which can be recalled in the display can be found in Chapter 3.
In the column "Access" it is apparent who may change the value:
"C" = Calibration lock, "S" = Supplier's lock, "K" = Customer's lock, "-" = read only.
Address AD Meaning Access
Entity : Object
1: 0100
STAT Momentary status
-
2: 0100 STSY System - momentary status -
1,2,5,6: 0110
ST.1, ST.2,
ST.5, ST.6
Momentary status 1, 2, 3,5, 6 -
2: 0141
DAYb Day boundary
C
4: 0150 M.PER Event: Limit 1 (measurement period) -
11: 0150 Event: Limit 1 (pulse comparison) C
11: 0158 Event: Limit 2 (pulse comparison) C
1: 0170 Calibration lock: Status / close K
1: 01F0
MCYC Measurement cycle time
C
1: 01F1
OCYC Operating cycle time
S
1: 01F5 Time of day: Switch test mode on/off S
1: 0202 VT.1 Totaliser Input 1 -
2: 0202 VT.2 Totaliser Input 2 -
1: 0203 V1 Adjustable counter input 1 S
2: 0203 V2 Adjustable counter input 2 S
2: 0207 Md.I2 Mode for input 2 S
1: 0210 Q1 Flow on input 1 -
2: 0210 Q2 Flow on input 2 -
5: 0210_1
T.MES Temperature measurement
-
1: 021A Customer number Input 1 S
1: 021B Customer name Input 1 S
1: 021C Measuring point number Input 1 S
1: 021D Measuring point name Input 1 S
1: 0222 Serial number of the meter on Input 1 S
5: 0224 Temperature meas. range lower limit C
5: 0225 Temperature meas. range upper limit C
5: 0227
BIN.T Temperature binary value
-
5: 0280 EQ1T Temperature Equation Coefficient 1 C
5: 0281 EQ2T Temperature Equation Coefficient 2 C
5: 0282 EQ3T Temperature Equation Coefficient 3 C
2: 0301 VbD Standard volume, disturbance quantity
S
4: 0301 VD Actual volume, disturbed
S
2: 0303 VbA Adjustable counter Vb S
4: 0303 VA Adjustable counter V S
2, 4...7: 032D DS-100 device number for totaliser S
2, 4...7: 032E DS-100 device number for undist. counter S
1 :0407 MdTI Daylight saving: yes / no S
1 :0452 ADJ.T Clock adjustment factor C