38
Setting the parameters for all models
Smoke alarm Salva KNX
• Version: 09.09.2016 • Technical Changes and Errors excepted.
7.5.
Computer
Activate the multi-functional computer, with which the input data can be changed by
calculation, querying a condition or converting the data point type. The menus for the
further setting of the computer are then displayed.
7.5.1. Computer 1-8
Set, in which cases input values received are to be kept per object. Please note that the
setting "After power restoration and programming" should not be used for the initial
start-up, as the factory settings are always used until the first call (setting via objects is
ignored).
Blocking object value
before 1st communication
0 • 1
Behaviour of the switching output
On block
• do not send message
• Send value
Sent value in %
0 ... 100
output sends on release
(with 2 seconds release delay)
• the current value
• the current value after receipt of an object
Computer 1/2/3/4/5/6/7/8
No • Yes
Maintain the
input values received via communication
objects
• never
• after power supply restoration
• after power supply restoration and
programming
Summary of Contents for Salva KNX basic
Page 5: ...4 Clarification of signs ...