elsner elektronik 70251, Installation And Adjustment

Page: 11 / 22

9 Transfer protocol
KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
5 Counter 2 Input B This object is used to send a
predefined value on a short
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
5 Threshol
d 2 Input B This object is used to switch
on/off a dimmable light
source (one-button
dimming). 1 bit DPT1 CR-T-
5 Duration
3 Input B This object is used to move
the shutter(s) up or down
(one-button shutter). 1 bit DPT1 CR-T-
6 Switch
long Input B This object is used to switch
on/off or to toggle on a long
button press. 1 bit DPT1 CR-T-
6 Counter
limit Input B This object is used to set the
counter limit availability. 1 bit DPT1 CR-TW
6 Send
value
long Input B This object is used to send a
predefined value on a long
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
6 Dimming Input B This object is used to dim
brighter or darker (one-
button dimming). 1 bit DPT3 CR-T-
6 Blinds
open/
close Input B This object is used to stop
movement and adjust the
blinds (one-button shutter). 4 bit DPT1 CR-T-
7 Scene Input B This object is used to recall
or learn the configured 8-bit
scene (1-64). 1 byte DPT18 CR-T-
7 1-bit
Scene Input B This object is used to recall
or learn the configured 1-bit
scene (1 or 2). 1 bit DPT1 CR-T-
8 Counter Input B This object is used as
counter (8-bit, 16-bit or 32-
bit) for rising edge, falling
edge or both edges. 1 byte,
2 bytes,
4 bytes DPT5,
DPT7,
DPT12 CRWTU
9 Interlock Input B This object is used to lock/
unlock functioning on
receiving the value 1. 1 bit DPT1 C-WTU
10 Dimming
on/off Input C/D This object is used to switch
on/off a dimmable light
source (two-button
dimming). 1 bit DPT1 CR-T-
No. Name Function Description Lenght DPT Flags