elsner elektronik 70251, Installation And Adjustment

Page: 12 / 22

10 Transfer protocol
KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
10 Sun
protec-
tion up/
down Input C/D This object is used to move
the shutter(s) up or down
(two-button shutter). 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
10 Switch Input C This object is used to switch
on/off, to toggle or to "send
status". 1 bit DPT1 CR-T-
10 Switch
short Input C This object is used to switch
on/off or to toggle on a
short button press. 1 bit DPT1 CR-T-
10 Counter
reset Input C This object is used to reset
the counter on receiving a
telegram with "0" or "1". 1 bit DPT1 CR-T-
10 Send
value Input C This object is used to send a
predefined value on a short
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-TW
10 Dimming
on/off Input C This object is used to switch
on/off a dimmable light
source (one-button
dimming). 1 bit DPT1 CR-T-
10 Sun
protec-
tion up/
down Input C This object is used to move
the shutter(s) up or down
(one-button shutter). 1 bit DPT1 CR-T-
11 Dimming Input C/D This object is used to dim
brighter or darker (two-
button dimming). 4 bit DPT3 CR-T-
11 Blinds
open/
close Input C/D This object is used to close
or open the blinds (two-
button shutter). 1 byte DPT1 CR-T-
11 Switch
long Input C This object is used to switch
on/off or to toggle on a long
button press. 1 bit DPT1 CR-T-
11 Counter
limit Input C This object is used to set the
counter limit availability. 1 bit DPT1 CRWTU
11 Send
value
long Input C This object is used to send a
predefined value on a long
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
11 Dimming Input C This object is used to dim
brighter or darker (one-
button dimming). 4 bit DPT3 CR-T-
11 Blinds
open/
close Input C This object is used to stop
movement and adjust the
blinds (one-button shutter). 1 bit DPT1 CR-T-
No. Name Function Description Lenght DPT Flags