elsner elektronik 70251, Installation And Adjustment

Page: 10 / 22

8 Transfer protocol
KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
1 Blinds
open/
close Input A/B This object is used to close
or open the blinds (two-
button shutter). 1 bit DPT1 CR-T-
1 Switch
long Input A This object is used to switch
on/off or to toggle on a long
button press. 2 bytes DPT1 CR-T-
1 Counter
limit Input A This object is used to set the
counter limit availability. 4 bytes DPT1 CR-TU
1 Send
value
long Input A This object is used to send a
predefined value on a long
button press. 2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
1 Dimming Input A This object is used to dim
brighter or darker (one-
button dimming). 4 bytes DPT3 CR-T-
1 Blinds
open/
close Input A This object is used to stop
movement and adjust the
blinds (one-button shutter). 1 bit DPT1 C-WTU
2 Scene Input A This object is used to recall
or learn the configured 8-bit
scene (1-64). 1 byte DPT18 CR-T-
2 1-bit
Scene Input A This object is used to recall
or learn the configured 1-bit
scene (1 or 2). 1 bit DPT1 CR-T-
3 Counter Input A This object is used as
counter (8-bit, 16-bit or 32-
bit) for rising edge, falling
edge or both edges. 1 byte,
2 bytes,
4 bytes DPT5,
DPT7,
DPT12 CRWTU
4 Interlock Input A/B This object is used to lock/
unlock functioning on
receiving the value 1. 1 bit DPT1 C-WTU
4 Interlock Input A This object is used to lock/
unlock functioning on
receiving the value 1. 1 bit DPT1 C-WTU
5 Switch Input B This object is used to switch
on/off, to toggle or to "send
status". 1 bit DPT1 CR-T-
5 Threshol
d 1 Input B This object is used to switch
on/off or to toggle on a
short button press. 1 bit DPT1 CR-T-
5 Duration
2 Input B This object is used to reset
the counter on receiving a
telegram with "0" or "1". 1 bit DPT1 CR-T-
No. Name Function Description Lenght DPT Flags