elsner elektronik 70251, Installation And Adjustment

Page: 13 / 22

11 Transfer protocol
KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
12 Scene Input C This object is used to recall
or learn the configured 8-bit
scene (1-64). 1 byte DPT1 CR-T-
12 1-bit
Scene Input C This object is used to recall
or learn the configured 1-bit
scene (1 or 2). 1 bit DPT1 CR-T-
13 Counter Input C This object is used as
counter (8-bit, 16-bit or 32-
bit) for rising edge, falling
edge or both edges. 1 byte,
2 bytes,
4 bytes DPT5,
DPT7,
DPT12 CRWTU
14 Interlock Input C/D This object is used to lock/
unlock functioning on
receiving the value 1. 1 bit DPT1 CR-TU
14 Interlock Input C This object is used to lock/
unlock functioning on
receiving the value 1. 1 bit DPT1 CR-TU
15 Switch Input D This object is used to switch
on/off, to toggle or to "send
status". 1 bit DPT1 CR-T-
15 Switch
short Input D This object is used to switch
on/off or to toggle on a
short button press. 1 bit DPT1 CR-T-
15 Counter
reset Input D This object is used to reset
the counter on receiving a
telegram with "0" or "1". 1 bit DPT1 C-W-U
15 Send
value Input D This object is used to send a
predefined value on a short
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-T-
15 Dimming
on/off Input D This object is used to switch
on/off a dimmable light
source (one-button
dimming). 1 bit DPT1 CR-T-
15 Sun
protec-
tion up/
down Input D This object is used to move
the shutter(s) up or down
(one-button shutter). 1 bit DPT1 CR-T-
16 Switch
long Input D This object is used to switch
on/off or to toggle on a long
button press. 1 bit DPT1 CR-T-
16 Counter
limit Input D This object is used to set the
counter limit availability. 1 bit DPT1 CR-T-
16 Send
value
long Input D This object is used to send a
predefined value on a long
button press. 2 bit,
1 byte,
2 bytes DPT2,
DPT5,
DPT7,
DPT9 CR-TU
No. Name Function Description Lenght DPT Flags