13
ETS Database Parameters
KNX B4 Universal Interface
• Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
6.
ETS Database Parameters
The default settings of the parameter are labelled by an underscore.
6.1. General
The Input channels can be used as single channels and pairwise combined for
functions "Dimming" and "Shutter".
6.2. Channel A, B, C, D
When Inputs are used as single channels, following functions are available and
described in this chapter.
6.2.1. Switch
Debounce time
10 ms • 30 ms • 60 ms • 120 ms
Setting the debouncing time prevents unwanted multiple operation of the inputs e.g.
due to bouncing of the contact. It applies to all four channels.
Function channels A/B
• not active
• single channels
• Dimming
• Shutter
Configuration of input channels A/B.
Function channels C/D
• not active
• single channels
• Dimming
• Shutter
Configuration of input channels C/D.
Function
• inactive
• Switch
• Counter
• Send value
• One-button dimming
• One-button shutter
Functions that can be set for each channel.
Sub function
• switch on rising edge
• toggle on rising edge
• send status
• switch on short/long button press
Defines the sub function on which the object value is changed.
Contact type
normally open • normally closed
Defines the contact type at the input, NO or NC. If NO is selected, the input is logic high
after the contact is closed.
Value rising edge
off • on
