Operating modes and functions
|
|
ELSA LANCOM Wireless IL-II
|
82
EN
Configuring the
LANCAPI
client
The configuration of the
LANCAPI
client is used to determine which
LANCAPI
servers will be used and how these will be checked. All parameters can
remain at their default settings if you are using only one
ELSA LANCOM
Wireless IL-11
in your LAN as a
LANCAPI
server.
햲
Start the
LANCAPI
client in the 'ELSAlan' program group. Information
regarding the drivers for the available service can be found on the 'Gen-
eral' tab.
햳
Switch to the 'LANCAPI Server' tab. First, select whether the PC should
find its own
LANCAPI
server, or specify the use of a particular server.
For the former, determine the interval at which the client should
search for a server. It will continue searching until it has found the
number of servers specified in the next field. Once the required num-
ber of servers has been found, it will stop searching.
In the event that the client should not automatically search for serv-
ers, list the IP addresses of the servers to be used by the client. This
can be useful if you are operating several
ELSA LANCOM
Wireless IL-11
in your LAN as
LANCAPI
servers and you would like to
specify a server for a group of PCs, for example.
It is also possible to set the interval at which the client checks
whether the found or listed servers are still active.
100324 Wireless IL-11.book Seite 82 Montag, 30. Oktober 2000 4:13 16
