|
Operating modes and functions
73
|
ELSA LANCOM Wireless IL-II
|
EN
햵
Install the
ELSA LANconfig
on a computer in the network.
햶
Start the program from the 'ELSAlan' program group. When loading, the
ELSA LANconfig
will detect an unconfigured router in the network and
will launch the wizard for the basic settings.
If you have not previously used any IP addresses in your network,
select the option 'Make all settings automatically' in this wizard and
confirm your selection with
Finish
in the next window.
The wizard assigns the IP address '10.0.0.1' with the netmask
'255.255.255.0' to the router and enables the DHCP server. On the
basis of this IP address, the device then determines the valid address
pool for the DHCP assignment.
In the event that IP addresses were already in use in your network
before converting to DHCP operation, select the option 'I would like
to adjust the settings manually' in the wizard. In the next window,
enter an unused IP address from the previously-used address range
and activate the DHCP server.
The wizard now assigns the selected IP address and associated net-
100324 Wireless IL-11.book Seite 73 Montag, 30. Oktober 2000 4:13 16
