ELSA LANCOM Wireless IL-II, Manual

Page: 13 / 100

|
Introduction
13
|
ELSA LANCOM Wireless IL-II
|
EN
1.3 What does the ELSA LANCOM Wireless IL-11
offer?
The following is an outline of the principal features of the device giving you
a quick overview of its capabilities.
Easy installation
Connect the LANCOM Wireless to the power supply.
Establish a link to the LAN.
Connect to a DSL port.
Plug in the ISDN cable.
Switch it on.
Go!
LAN connection
Access points for wireless networks by function in ELSA Ethernet environ-
ments. Use the 10Base-T connection and a hub or switch to connect the
ELSA
LANCOM Wireless IL-11 to a 10 Mbit LAN or to a DSL modem.
WAN connection
The ELSA LANCOM Wireless IL-11 is connected to the S
0
interface(s) of an
ISDN basic rate interface in point-to-multipoint configuration (multi-device
terminal) or in point-to-point configuration (system terminal). The router au-
tomatically detects your port type and the D-channel protocol being used.
Switched connections using DSS1 or 1TR6 can also be used, as can
leased-line connections.
Operation with an ISDN leased line is not included in the standard delivery
scope of the router. The leased line option can be enabled by entering a code.
DSL connection
With special DSL firmware (on CD-ROM), you can connect your LANCOM to
a DSL modem (such as the T-DSL network offered by Deutsche Telekom).
Instead of connecting to the Ethernet, you can have quick access to the Inter-
net. This procedure can be switched in both directions by using the corre-
sponding firmware.
100324 Wireless IL-11.book Seite 13 Montag, 30. Oktober 2000 4:13 16