Installation
|
|
ELSA LANCOM Wireless IL-II
|
30
EN
tem. With other operating systems, you can use
ELSA WEBconfig
in an
HTML browser to carry out the configuration.
You will need a Windows PC on the LAN to run
ELSA LANconfig
. ELSA also
provides a Linux version of
ELSA LANconfig
which can be downloaded from
their website.
햲
Install the TCP/IP network protocol on the computer that will be used to
set up your device.
햳
Then install
ELSA LANconfig
. If the setup program does not start up auto-
matically after insertion of the
ELSA LANCOM
CD, start Windows
Explorer, click on 'autorun.exe' on the
ELSA LANCOM
CD and follow the
instructions in the install program.
2.7
Quickstart
The following steps should help you get your device running quickly and eas-
ily. Choose from three different installation scenarios:
The TCP/IP protocol is installed on the system and there is no DHCP
server on the LAN
In this case, the
LANCOM
activates the DHCP server in automatic mode. It
assigns IP addresses in the range of 10.x.x.x. You can assign a fixed IP
address to the
LANCOM
or let it be assigned automatically. In the later case,
the
LANCOM
is assigned the address 10.0.0.1.
The TCP/IP protocol is installed on the system and there is already a
DHCP server on the LAN
The
LANCOM
acquires its IP address from the DHCP server on the LAN.
LAN-
config
finds the
LANCOM
at its address. The setup wizard asks for a static
IP address. Because the address is previously unknown, you cannot access
the
LANCOM
using
WEBconfig
.
The TCP/IP protocol is installed on the system with a fixed IP
address
In this case,
LANconfig
finds
LANCOM
at the client computer's address,
which ends in 254 (x.x.x.254). The setup wizard asks for a static IP address.
100324 Wireless IL-11.book Seite 30 Montag, 30. Oktober 2000 4:13 16
