Operating modes and functions
|
|
ELSA LANCOM Wireless IL-II
|
64
EN
Timeouts
These times indicate the length of time the B channels should remain
active after:
the last data has been exchanged across static connections for the
holding time B1.
the data throughput has dropped below a specified level for the hold-
ing time B2 in dynamic connections.
Layer name
The layer stands for a collection of protocols to be used for this connec-
tion. The layer must be set up identically on both sides of the connection.
Callback
If the router receives a call from this specific remote station, it may be set
to refuse the connection. Instead, the remote station is called back using
the following options:
Normal callback
Callback using the fast ELSA process
Callback after name verification
Await the callback from the remote station using the fast ELSA pro-
cess
4.3.2
Interface settings
The interface settings for the
ELSA LANconfig
can be found in the 'Manage-
ment' configuration section on the 'Interfaces' tab, or under
/Setup/WAN-module/Interface-list
during Telnet or termi-
nal sessions.
The overall parameters are set for each interface (i.e. each S
0
port) in the
interface settings. These parameters apply to all operating modes of the
device. Specifically, they are:
D channel protocol used on the S
0
port
Automatic recognition: DSS1 (Euro-ISDN), DSS1 point-to-point, 1TR6,
Group 0 leased-line connections
Leased line option
B channel to be used for the leased-line connection
100324 Wireless IL-11.book Seite 64 Montag, 30. Oktober 2000 4:13 16
