Configuration and management
|
|
ELSA LANCOM Wireless IL-II
|
42
EN
Then the device will no longer take calls on the dial-up connection using the
PPP settings. The solution to this is to agree upon a special calling number for
configuration access. If the device receives a call on this number, it will
always use PPP, regardless of any other settings made on the router. Only a
specific user name which is automatically entered by the
ELSA LANconfig
program during call establishment will be accepted during the PPP negotia-
tions.
햲
Switch to the 'Security' tab in the 'Management' configuration section.
햳
In the 'Configuration access' field, choose whether the configuration is
fully accessible, read-only or not accessible from remote networks.
Alternatively, enter the following command during a Telnet or terminal
connection:
set/setup/config-module/wan-config
[on][read][off]
If you wish to block access to the router from the WAN entirely, set configu-
ration access from remote networks to 'denied'.
햴
Enter a calling number of your connector as the calling number in the
'configuration access' area, which is not used for other purposes.
Alternatively, enter the following command:
set /setup/config-module/Farconfig 123456
햵
You can protect the configuration of the device by assigning a password.
100324 Wireless IL-11.book Seite 42 Montag, 30. Oktober 2000 4:13 16
