41
Cucitura di bottoni
q
Selettore di motivi:
C
w
Piedino:
Piedino a zigzag
e
Tensione del filo:
3 – 7
r
Lunghezza del punto:
Qualsiasi
t
Placca rammendo
z
Montare la placca rammendo.
Impostare il quadrante selettore di motivi su “B”.
x
Disporre il bottone sotto il piedino. Sfilare l’ago e ruotare
il volantino lentamente per abbassare l’ago nel foro
sinistro del bottone.
Allineare il foro destro del bottone con la fessura del
piedino e abbassare il piedino per tenere fermo il
bottone.
c
Sollevare l’ago e regolare la larghezza del punto in
modo che l’ago penetri nel foro destro del bottone.
Infilare nuovamente l’ago e cucire 10 punti. E’ possibile
porre uno spillo sulla sommità del piedino per formare un
gambo.
v
Sollevare l’ago, quindi cucire alcuni punti per fissare la
cucitura.
Sollevare il piedino e tagliare il filo in eccesso.
Sewing onButtons
q
Stitch selector:
C
w
Presser foot:
Zigzag foot
e
Thread tension:
3 – 7
r
Stitch length:
Any
t
Darning plate
z
Set the Pattern Selector at B (left needle position).
x
Mark the button placements on the fabric.
Position the darning plate onto the needle plate.
Place fabric under the foot.
Place the button under the foot aligning the left hole with
the needle point.
Lower the foot. Sew a few stitches to lock the
threads. Place a straight pin on top of the button in
between the holes.
(See illustration) When sewing over the button and
straight pin, a shank will be created.
Set the Pattern Selector at C. Select the zigzag width to
match the holes in the button.
c
Turn the handwheel to confirm correct width. Sew several
stitches to secure the button to the fabric.
Set the Pattern Selector at B. Sew several stitches to lock
the threads.
v
Cut the threads 8˝ (20 cm) leaving a thread tail.
Bring the needle thread down through the button hole
and wind it around the thread shank.
Draw the thread to the wrong side and knot.