Tuba Installation Guide
Installation
MAN-TUBIG (Ver. 1.503)
45
3.4.7.3.
Single-Ended Auxiliary Input Option on FEEDBACK B - (YA[4]=2)
The Tuba can be used as a slave by receiving the position data of the master encoder (on Port
B1) in Follower or ECAM mode. In this mode Port B2 provides
differential buffered auxiliary
outputs
for the next slave axis in Follower or ECAM mode.
Below are the signals on the Auxiliary Feedback ports when set up to run as a single-ended
auxiliary encoder input:
Port Pin Signal
Function
Pin Positions
B1
1
INDEX
Auxiliary Index
input
COR016A
15-Pin D-Sub Socket
B1
2
CHB
Auxiliary Channel B
input
B1
3
CHA
Auxiliary Channel A
input
PWR
4
+5V
Encoder Supply Voltage
PWR
5
SUPRET
Encoder Supply return
B2
6
CHAO
Buffered Channel A output
B2
7
CHBO
Buffered Channel B output
B2
8
INDEXO
Buffered Index output
-
9
-
Do not connect this pin
8
15
1
9
Port B1
Port B2
Power
N.C.
15-Pin D-Sub Plug
on Tuba
-
10 -
Do not connect this pin
-
11 -
Do not connect this pin
PWR 12 SUPRET
Supply return
B2
13 CHAO-
Buffered Channel A complement output
B2
14 CHBO-
Buffered Channel B complement output
B2
15 INDEXO-
Buffered Index complement output
Table 8: Single-Ended Auxiliary Encoder Option on FEEDBACK B - Pin Assignments
FEEDBACK B on the front of the Tuba has a 15-pin D-Sub plug. Connect the Auxiliary Feedback
cable from the feedback device to FEEDBACK B using a 15-pin D-Sub socket with a metal
housing. When assembling the Auxiliary Feedback cable, follow the instructions in Section 3.4.4
(Feedback and Control Cable Assemblies).
