Elmo T-350 Instruction Manual Download Page 69

Page: 69 / 81

Example of the error indication

Icon

Description

Solution

Temperature

error

The internal temperature has

been increased.

The projector will be turned off

in 5 seconds.

Turn off the projector immediately

and allow the projector to cool

down for at least 30 minutes.

Make sure of the following and turn

on the projector:

- The ventilator is not blocked by

objects or in any way obstructed.

- The ventilator is not covered with

dust.

- The peripheral temperature is not

exceeding 35

℃

FAN error

There is a problem with the

internal fan.

The projector will be turned off

in 5 seconds.

Turn off the projector immediately

and allow the projector to cool

down for at least 30 minutes.

Make sure of the following and turn

on the projector:

- No foreign objects are inserted

between the rotating fan blades.

- There are no magnetic objects

near the projector.

An error occurred.

The projector will be turned off in 5

seconds.

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands