Elmo T-350 Instruction Manual Download

Page: 62 / 81

Detail settings menu

Selecting the installation mode

1. Display the

“Detail settings” menu.

2. Select the icon

with the

buttons on the remote control or on the

control panel.

Press the

button to execute the selection.

The

“Installation mode setting” menu will be

displayed.

3. Select

“Desktop” or “Ceiling” with the

buttons on the remote

control or on the control panel.

Icon

Mode

Description

Desktop

To be used when the
projector is installed
in the desktop mount
position.

Default

Ceiling

To be used when the
projector is installed
to the ceiling.

Press the

button to execute the selection and return to the

“Detail settings”

menu.

■

Do not place the projector on an unstable cart, stand, or table. Doing so

may cause the projector fall down or tip over.

■

Installation work (such as ceiling suspension) should only be carried out

by a qualified technician. If installation is not carried out correctly, the

projector may fall over, causing injury or accident. Contact a qualified

technician or your dealer for installation.

CAUTION

Installation mode setting menu

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands