22
Raising the projected image
Projected image can be raised up when using the built-in tilt stand underneath the
projector.
Bottom of the projector
1. Use the tilt stand
Setting up the tilt stand allows you to raise the projected image.
Two positions tilt stand allow you to set up projection angle to either 5°or 10°.
The more inclination angle is added, the higher the image is projected.
2. Reset the position of the projected image.
The projector will project horizontally when the tilt stand is folded to the first
position.
Inclination angle
■
Keystone distortion can occur when using the tilt stand.
Adjust keystone settings to correct keystone distortion.
Refer to
“CORRECTING THE KEYSTONE DISTORTION” (Page34, 46)
for details.
Tilt stand
（
10°)
Tilt stand
（
5°)
N o t e
