Elmo T-350 Instruction Manual Download

Page: 60 / 81

Detail settings menu

Auto power off setting menu

***

Setting the auto power off

1. Display the

“Detail settings” menu.

2. Select the icon

with the

buttons on the remote control or on the

control panel.

Press the

button to execute the selection.

The

“Auto power off setting” menu will be displayed.

3. Select the auto power off time with the

buttons on the remote control or on the control

panel.

The following auto power off time can be selected.

Auto

power

off time

Off (Disable the auto power off function)

1 minute

3 minutes

5 minutes

10 minutes

20 minutes

30 minutes

60 minutes

120 minutes

180 minutes

Default

Press the

button to execute the selection and return to the

“Detail settings”

menu.

When the auto power off function is enabled, the projector will be turned off

automatically after no operation is performed, either from the control panel or

from the remote control, for a preset amount of time.

The message as shown in the right picture

will be displayed 30 seconds before the

projector is turned off automatically.

The projector will be turned

off after 30 seconds.

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands