Elmo T-350 Instruction Manual Download Page 42

Page: 42 / 81

3 MENU OPERATION

Various configurations and adjustments to the projected image can be done from the

menu.

DISPLAYING THE MENU AND BASIC OPERATION

Displaying the main menu

Press the MENU button.

Press the MENU button on the

remote control or on the control

panel.

The menu will be closed if the MENU

button is pressed again.

The menu will also be closed

automatically after 30 seconds of no operation.

Operating the menus

The selected item in the main menu will be marked in blue.

If you open the selected item, a sub menu will be displayed and you can configure

the details.

The items that cannot be selected will be marked in dark grey.

Main menu

Sub menu

The selected item will be marked in blue.

The non selectable
items will be marked in
dark grey.

→

Remote control

Control panel

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands