Elmo T-350 Instruction Manual Download

Page: 58 / 81

ECO mode setting menu

Checking various information

1. Display the

“Detail settings” menu.

The following information can be viewed.

Information

Description

Input Source

The current input source will be displayed.

Version

The firmware version of the projector will be displayed.

Setting the ECO mode

1. Display the

“Detail settings” menu.

2. Select the icon

with the

buttons on the remote control or on the
control panel.

Press the

button to execute the selection.

The

“ECO mode setting” menu will be

displayed.

3. Select

“ON” or “OFF” with the

buttons on the remote control or on
the control panel.

Setting

Description

To activate the ECO mode.

OFF

To cancel the ECO mode.

Default

Press the

button to execute the selection and return to the

“Detail settings”

menu.

Detail settings menu

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands