Elmo T-350 Instruction Manual Download Page 13

Page: 13 / 81

Control panel

Number

Mark

Name

Function

Related

Page

①

Power indicator

The green LED turns on when

the projector is turned on.

→

P.15

②

Temperature

indicator

Red LED light turns on or flashes

when the projector is

overheating.

→

P.15,70

①

②

③

⑨

⑩

④

⑥

⑦

⑤

⑧

CAUTION

■

Do not look into the lens during the projection. The strong light emitted from

the lens may cause damage to your eyes. Pay attention especially when you

use the projector in an environment where there are children.

■

Do not touch around the exhaust vent during or immediately after the

projection. The area around the exhaust vent may become very hot and

could result in burn.

■

Hot air may be emitted from the exhaust vent. Do not place any objects,

which are easily affected by heat, in front of the exhaust vent.

Summary of Contents for T-350


















































































Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands

Elmo T-350, Instruction Manual

Search results

Summary of Contents for T-350

Reviews:

Related manuals for T-350

Brands by name

Popular brands