31
Network Settings (for PX-30 only)
To display the network configuration area as well as the network information assigned to a connected
device. Connect the LAN port on the back panel to the network with the LAN cable.
（
⇒
P.14
）
By connecting to the network, the following actions are possible.
・
To operate the PX-30 with commands. (You can control the PX-30 from your PC.)
When selecting “DHCP”, a unique IP address is assigned to the PX-30 automatically.
If you n
eed to configure the IP address manually, select “static”.
When performing the operation with commands, connect your PC to the PX-30 with the LAN cable
after installing a serial communication software on your PC.
Tap the item to display the on-screen keyboard with numeric keypad. Then enter the necessary
information manually.
Product Information
MAC Address
MAC address set in the PX-30
inet
To select between static and DHCP.
IP Address
IP Address
Net Mask
Net Mask
Gateway
Gateway
DNS1
DNS1
DNS2
DNS2
Host Name
Host Name
Camera Information
Production Name
Product name
（
e.g. PX-30
）
Serial Number
Serial number of the PX-10/30
Production Version
Version of the PX-10/30
CMOS
Version of CMOS FPGA
MAIN
Version of MAIN FPGA
PANEL
Version of PANEL FPGA
HDBaseT (for PX-30 only)
Version of HDBaseT
Production Date
Production date of the PX-10/30
License
The license information used for the PX-10/30 is displayed.
Numeric
keypad
keyboard
CAUTION
For details about the commands, contact our branch/office near your location.
