17
➋-2
SUPPLIED ACCESSORIES
◆
REMOTE CONTROL
PREPARATION OF THE REMOTE CONTROL
Remove the battery case by squeezing the release lock.
Insert the coin battery into the battery case, so you see the positive (+) side facing up.
Then insert the battery case into the remote control.
RECEIVING IR FROM THE REMOTE CONTROL
Point the IR transmitter of the remote control to the IR receiver of the PX-10/30, and press the
desired button.
（⇒
P.12
）
Receivable range: within approx. 5m
※
1
In the System Setting menu, the rotation angle can be selected
between 90°and 180°.
（
⇒
P.29
）
Button
Name/Function
Button
Name/Function
AF
LED lighting
To focus automatically.
To ON/OFF the LED lighting.
Zoom out
Camera
To shrink the camera image.
To display the camera image.
Zoom in
RGB in
To enlarge the camera
image.
To display images being input to
the RGB in port.
Default
HDMI in 1
To initialize the brightness
settings.
To display images being input to
the HDMI in 1 port.
Brightness DOWN
HDMI in 2
To darken the camera image.
To display images being input to
the HDMI in 2 port.
Brightness UP
Capture
To brighten the camera
image.
To save the currently displayed
image as a still image.
Image rotation
Recording
To rotate the camera image.
※
1
To start and stop recording.
Freeze
Power
To pause and restart the
camera image.
To ON/OFF the power.
Release lock
①
②
③
WARNING
Children may ingest small batteries; always keep
batteries safe and out of reach.
If a battery is swallowed, consult a doctor
immediately as this could result in asphyxiation or
be an obstacle to digestion, etc.
