27
➋-4
CONFIGURING THE SETTINGS
Each setting of the PX-10/30 can be configured through the menu (texts or icons) displayed on the
screen.
◆
HOW TO CONFIGURE THE SETTINGS
Press the Settings button [ ] on the operating panel.
The settings menu appears. “System Setting”, “Image Quality Setting”,
“Network Settings”, and “Product Information” can be selected from the menu.
［
✔
：
Default setting
（
default value
）
］
Menu
Function
Pages
System Setting
To display the menu for configuration of the system.
⇒
P.27
Image Quality Setting
To display the menu for configuration of the camera image.
⇒
P.30
Network Settings
To display the menu for configuration of the network function.
（
For PX-30 only
）
⇒
P.31
Product Information
To display the information of the version and license of the camera.
⇒
P.31
System Setting
（
1/5 page
）
Name
Selection item
Function
Resolution
Auto
✔
To set the resolution of the output image.
※
The PX-10 does not support UHD
（
3840 x 2160
）
.
UHD
（
3840 x 2160
）
FHD
（
1920 x 1080
）
HD
（
1280 x 720
）
UXGA
（
1600 x 1200
）
XGA
（
1024 x 768
）
VIewing angle
※
1
Normal (16
：
9
）
✔
To set the viewing angle of the output image.
Full (4
：
3
）
Flicker mode
50Hz
When there is flickering in the image due to the
fluorescent light, set to the same value as the power
supply frequency of the location where the PX-10/30
is used.
50Hz: Europe
60Hz: Japan/USA
60Hz
✔
OFF
ND Filter
Select this item when there is halation due to
flickering. (For example, when shooting outside or
when the surrounding environment is too bright.)
Flickering may be reduced.
