Elmo EL55R2 Instruction Manual Download Page 13

Page: 13 / 89

1.3

Installation

Installation Conditions

・

Use the product in the following conditions.

Temperature

～

℃

Humidity

～

％

・

To prevent internal heat buildup, install the display monitor in a well-ventilated place, keeping the

distance as specified in the following figure from the surrounding area.
Use the following screws to attach the VESA brackets.

For EL65R2

・

EL75R2

・

EL86R2: M8 screws with a length of 20 mm

For EL55R2: M6 screws with a length of 20 mm

Caution

⚫

Since the display monitor is heavy, consult the dealer from whom you purchased
this product when installing, removing or moving it.

⚫

Installation must be done by professional service engineers. Otherwise, injury may
occur by improper installation.

⚫

If you want to mount the display monitor on a wall or suspend it from the ceiling,
ask a specialist for installation work.

ELMO is not responsible for any accident or damage caused by improper installation.

⚫

If you need to move the display monitor after it is attached to the stand, always
move the product with 2 or more people.

⚫

Be careful not to block the ventilation holes when installing. The heat will be
trapped inside and may cause a malfunction or a fire.

⚫

Do not install the display monitor in a place where it may be exposed to rain or
spray, or in a place with high humidity.

⚫

Do not install the display monitor near the air outlet of the air conditioner.

Condensation may form due to sudden temperature changes, which may corrode the inside
and cause a malfunction.

30cm

Wall

30cm

10cm

Summary of Contents for EL55R2


























































































Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands

Elmo EL55R2, Instruction Manual

Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands