Elmo EL55R2 Instruction Manual Download

Page: 84 / 89

7.2

Maintenance

Clean and check the product regularly for long-term use.

Caution

⚫

Be sure to disconnect the power plug from the outlet before cleaning.

⚫

Rubbing or wiping the screen strongly may scratch the surface of the LCD display.

⚫

Do not wipe with chemicals such as thinner, benzene or alcohol, and do not apply
insecticide.

It may cause discoloration or damage the surface finish.

⚫

If the IR receiver becomes dirty, it may not operate properly. Wipe off any dirt with a soft
cloth.

⚫

If dust collects inside the IR receiver, infrared rays cannot be transmitted or received
correctly, causing malfunction.

⚫

For cleaning the inside of the product, consult with the dealer whe re you purchased the
product. (Chargeable)

⚫

Be sure to pull out the power plug when the product is not used for a long time.

◆

Cleaning of the LCD display

Wipe gently with a soft, dry cloth.

Summary of Contents for EL55R2


























































































Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands

Elmo EL55R2, Instruction Manual

Search results

Summary of Contents for EL55R2

Reviews:

Related manuals for EL55R2

Brands by name

Popular brands