68
◆
Configuring the Source Settings
1
Tap “Admin Setting” and enter the administrator password.
The default password is 0000000 (7 digits).
2
The Source Settings menu will appear.
No.
Name
Function
1
Video Quality
To set the brightness, contrast, and color tone of the input video.
(*You cannot configure the screen settings of an Android device
with this menu item.)
You can select this menu item from "Menu" in the side menu bar
while the image is displayed on the display monitor.
2
Audio Settings
To configure the settings of the speaker of the product.
3
Autojump upon
source insertion
To switch to the newly added input source automatically.
[Auto Jump]: The screen will switch automatically when a new
input source is added.
[Popup Prompt]: A popup will appear when a new input source is
added. The screen will not switch automatically.
●
Default setting
：
Auto Jump
4
Autojump when no
source signal
To switch to other input source automatically when the input
source being used is disconnected.
●
Default setting: ON
5
Rename Source
To change the name of the input source.
6
Source When
Power On
To select the default input source which appears on the screen
after power on.
●
Default setting
：
Android (Home screen)
7
Source Lock
To set whether or not to lock each input source.
●
Default setting
：
OFF(not locked)
8
Nosignal Auto
Shutdown
To set the time before the product shuts down automatically when
there is no input signal.
Close / 5 min. / 10 min. / 15 min.
●
Default setting
：
Close (The product does not shut down.)
9
HDMI Out
To select the resolution for HDMI output.
Auto / 1920×1080 / 3840×2160
●
Default setting: Auto
(This function is available only for models with an HDMI Out port.)
10
HDMI EDID
To switch between HDMI 1.4 and 2.0.
●
Default setting
：
2.0
(This setting item is available only when the HDMI image is
displayed on the display monitor.)
1
～
13
