| About this manual
Elma Schmidbauer GmbH
32 / 32
Elmasonic Med
Hold down the
Mode
button until the
Setup
menu is shown on the display.
To set the
LED test
function, press the
Plus/Minus
buttons repeatedly until the
parameter number 10 is shown.
Then press the
Plus
button to change the parameter value from 00 to 01.
The LEDs will light up for approx. 5 seconds. The parameter value will be reset
automatically. Repeat this procedure as required.
Press the
On/Off
button to end the LED test. .
17
Disposal
CAUTION
Once the unit has reached the end of its service life, ensure that the unit and
accessories are disposed of safely and correctly:
Ø
Clean and disinfect the old device and accessories before disposal.
Ø
Secure the old device against unauthorised access until removal; if necessary,
dispose of the power cable separately.
Ø
Observe regionally applicable disposal directives.
