Elma Elmasonic Med, Translation Of The Original Manual

Page: 17 / 32

Elma Schmidbauer GmbH About this manual |
Elmasonic Med 17 / 32
Sweep
(2 segments)
This mode performs most cleaning tasks with an evenly
distributed sound field (standard ultrasound mode).
Pulse
(3 segments)
Removes stubborn dirt using pulsed sound field distribution.
Dynamic
(4 segments)
Combines the ultrasound modes Sweep and Pulse to improve
the overall cleaning performance.
8.2 Operating status symbols
The following symbols are shown on the display as soon as the unit enters the respective operating
status:
End of
cleaning
Ultrasonic cleaning has been completed and is finished.
Remaining
time Ultrasonic cleaning is running; the remaining cleaning duration
is shown below the symbol.
Dry operation
(Not available for Elmasonic 500/900).
The tank is empty, or the filling level is too low. Dry-run
detection is available during active heating.
Setup
Setup mode is activated; the unit parameters [ } 27] can be
changed.
Heating The ultrasonic bath is currently being heated.
Temperature-
controlled
start
Ultrasonic cleaning will start as soon as the set cleaning
temperature has been reached.
Temperature
limit
A temperature limit is defined as a maximum permissible
cleaning temperature. A higher temperature cannot be set.
The symbol flashes when the temperature limit is reached or
exceeded.
..
Programme
Shows the selected cleaning programme (programme number
1–4). A total of 4 cleaning programmes can be stored.