B
lueto
o
th
Ex
pl
o
re
r
4
0
0
If a recording is initiated without having first selected an analyzer, the
Available analyzers
dialog will pop up to request the user to select an analyzer.
Selecting the default checkbox in this dialog will conveniently force the
automatic selection of the specified analyzer on each new recording.
6.4
Injection API
The Bluetooth Explorer 400 application supports an HCI Injection API, selectable in the
Available Analyzers
dialog in the
Record
menu. The Injection API uses UDP (User Datagram
Protocol) to push HCI traffic to the Bluetooth Explorer 400 software, which is displayed live in
the
HCI Overview (Injection)
, just as if this traffic was being captured on one of the standard
HCI capture ports on the analyzer.
In addition, injection of the user’s log messages is supported. This feature allows for the user’s
“
printf
” debug messages to be displayed in the
Message Log Overview
, concurrent with any HCI
traffic being captured by the BEX400 hardware. The BEX400 hardware is not required to
capture injection sources.
Use the link below to download helpful documents on the Injection API, including samples.
http://www.ellisys.com/better_analysis/bex400a_injection_api.zip
To enable the Injection API:
1.
Select
Tools | Options
from the menu, then select the
Injection API
tab.
2.
The
Injection API
tab appears:
3.
Under
Network Settings
, specify the
UDP Listen Port
.
4.
Under
Injection Services
, check
Message Log
and/or
HCI
as desired.
5.
Click on
OK
.
Capturing Traffic
| 67 of 201
