A
n
al
yz
er
U
se
r
Gu
ide
To capture Audio I2S (Inter-IC Sound):
Audio captured over the I2S interface is displayed in the
Instant Audio
pane.
1.
Select the
Wired
tab.
2.
Check the
Audio I2S: Inter-IC Sound
check box.
3.
Click
OK
.
4.
Attach the Flying Leads Cable between the IO Probe connector on the analyzer’s back-panel
and the Audio I2S interface. Use pin assignments shown in
Recording Options
, or specify
desired pin assignments. See Appendix A – Flying Leads Cable for details.
To increase or decrease the sensitivity of the analyzer’s receivers:
1.
Slide the
Radio RF Gain
slide bar to the right (to increase sensitivity) or to the left (to
decrease sensitivity).
2.
Click
OK
.
The
Radio RF Gain
setting is set to a nominal default value, which is
appropriate for almost all cases. In most cases, this slide bar will not need
adjustment.
6.3
Selecting an Analyzer
It is possible that multiple Bluetooth Explorer 400 analyzers may be attached to a single PC
hosting the analyzer desired for recording.
To select an analyzer:
1.
Select
Record | Select an analyzer
from the menu.
Alternatively, select the drop-down arrow located on the
Record
button located on the
toolbar.
The
Available analyzers
dialog appears:
2.
Select the desired analyzer.
3.
Click on
OK
.
66 of 201 |
Capturing Traffic
