Elliott Digger Derrick, Operation & Maintenance Manual, Page: 346 / 376

Model 75 service manual, SM75_0413 Page 6
eskridge, inc. olathe, KS. 913-782-1238 www.eskridgeinc.com
7) Lubricate o-ring (11b) and install on the pilot of the
Stage I ring gear (2) . Install ring gear and align mounting holes
of ring gear with holes in base. Use the scribed line made
during disassembly for reference.
8) Slide Stage I carrier (6a) onto Stage II sun gear (9) .
9) Install input gear (5) and thrust washers (10a & 10b) . Lubri-
cate o-ring (11b) and install on the pilot of the gearbox cover
(4) . Noting the scribed line made during disassembly, install
cover .
10) Ensure the unit spins freely by using a splined shaft to drive
the input gear (5) .
11) Install motor (17) onto cover (4) using hex-head capscrews
(13b)
and lockwashers
(13D).
Lube fasteners and torque to
110 ft-lb.
12) Place bail (15) onto assembly and align holes in bail and cov-
er (4) using scribed line made during disassembly as a refer-
ence. Install and torque the 20 1/2-13 hex head capscrews
(13a) with flatwashers (13c) . Torque the capscrews to 110
ft-lbs dry, or 80 ft-lbs if fasteners are lubricated.
13) Fill the unit to the proper level, as specified, with GL5 EP
80/90 gear oil.
The digger is now ready to use.