Elliott Digger Derrick, Operation & Maintenance Manual, Page: 106 / 376

Wedge Socket EEC-0053
V1.1
Wedge Socket

Loads may slip or fall if the Wedge Socket is not properly installed.

A falling load can seriously injure or kill.

Read and understand these instructions before installing the Wedge Socket.

Do not side load the Wedge Socket.

Apply first load to fully seat the Wedge and Wire Rope in the socket. This load
should be of equal or greater weight than loads expected in use.

Do not interchange wedges between S-421Tand US-422T or between sizes.
TABLE 1
Rope Size
3/8
1/2
5/8
3/4
7/8
1
1 1/8
Clip Size
3/8
1/2
5/8
3/4
7/8
1
1 1/8
*Torque Ft./lbs.
45
65
95
130
225
225
225
* The tightening torque values shown are based upon the threads being clean, dry,
and free of lubrication.