Using the Setup Menu
Using the Setup Menu
32
Installation
1
AUTO CHANNEL SEARCH
Press ENTER button after choosing “Auto
CH Search” by pressing
or
button.
1
Press ENTER button to confirm.
It will search channels automatically.
4
Press button, and select the wanted
country by pressing
or button.
3
• While doing Channel Search, it will erase and replace
all previously stored channels. Before doing Channel
Search, make sure if the signal source is the same with
your setting. (Cable or Antenna)
NOTE
2
MANUAL TUNING (This function only works
in TV mode.)
You can tune in new stations.
After the channel search is finished,
the message appears as follows.
Press button to exit.
5
Press button, and select your desired
source, cable or Antenna(Air), by
pressing or button.
2
3
EDIT CHANNEL (This function only works in
TV mode.)
Changing the station name
If your DVD Recorder is showing no station
name or is showing name incorrectly, you
can change it.
Press ENTER button after choosing
“Manual Tuning” by pressing or
button.
“Tuning Bar” appears on TV screen.
1
Press ENTER button after choosing “Edit
Channel” by pressing or button.
“Channel List” appears on TV screen.
1
Tune in new station by pressing
CHANNEL - or C button,
press ENTER button to store the
captured station.
2
Tune in other stations by pressing
CHANNEL - or C button or
press button to leave the tuning mode.
3
