Connection
13
Connection
• Turn off the power and unplug both units before setting up any connections.
• RF OUT, is labeled TO TV, is signal pass-thru only.
NOTE
Connection for Video Output Terminals
Composite Video (CVBS) Output
The composite video output is supported by most televisions. The composite video jack on TV is usually
yellow and may be labeled video, CVBS, composite. Connect “Front L” and “Front R” to AUDIO INPUT (L/R)
on TV and set “Analog Output” to “LR Stereo” from the AUDIO SETUP menu.
SCART A/V Output (Optional)
The SCART terminal can be connected to the TV equipped with SCART connector.
The audio transmitted on the SCART is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S-Video input. The S-Video jack on TV
may be labeled S-Video, Y/C, S-VHS. The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be green, blue, red. The
component video provides the best picture. Whenever the component video output is used, you must set
“Video Output” to “Component” from the VIDEO SETUP menu.
