22
Siren Control
To control your Siren or Bellbox:
SMS Command: SRTX
Parameter 1: T: Tamper Control
C: Confirmation Setting
E: Entry/Exit Setting
Parameter 2: 0: Disable
1: Enable
Confirmation Setting
The Outdoor Siren and the Indoor Siren can be
enabled or disabled for arming and disarming
confirmation.
When set to Enabled, the Siren will beep
when the system is armed or disarmed to
confirm the mode change.
When set to Disabled, the Siren will not
make any sound when system mode is
changed.
This function is only available for SMS
Remote Command
Entry/Exit Setting
The Outdoor Siren and Indoor Siren can be
enabled or disabled from sounding warning
beeps during Entry Time and Exit Time
When set to Enabled, the Siren will beep
during Entry and Exit Time.
When set to Disabled, the Siren will not
beep during Entry and Exit Time.
This function is only available for SMS
remote command.
PSS Control
To remotely turn on/off your Power Switch, or
learn in new Power Switch:
SMS Command: PSSX
Parameter 1: 1~4: PSS Channel
Parameter 2: 1: Turn On
0: Turn Off
L: Send learn code for this
channel
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
:
:
>
>
To turn on the Power Switch in Channel 1, the
SMS command will be:
PROG 1234 PSSX:1,1
The PSS Control function is not available
for the current CR200 Home version.
Sending Multiple SMS Message
You can send more multiple commands in one
SMS message. The commands are separated
by “;”
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
:
:
>
>
To send User PIN Code setting, SMS Keyword,
and SMS Code commands in one SMS
message.
PROG 1234 PINU:1,1234,JOHN; PINK:ABCD;
PINC:1234
<
<
N
N
O
O
T
T
E
E
>
>
The maximum characters allowed for
one SMS message is 100.
The confirmation SMS message sent
back from Control Panel is limited to
40 characters.
