comfig.txt name
Description
Default Value
Acceptable Values
AdslVPI
ADSL VPI
8
Integer
AdslVCI
ADSL VCI
35
Integer
AdslCloneMac
Not documented
0
AdslCnxTO
ADSL connection time out
180
Integer [seconds]
CBPubEMail
Publish email destination IP address
[empty]
Email address
T2mAccSrvAddr
Talk2M Access Server Address
talk2m_free_eu
URL
UserDefData1
Not documented
[empty]
VPNSrvAddrMode
VPN WAN address or name
0
0
Defined manually
1
Defined by Talk2M
T2mAccountName
Talk2M Account ID
[empty]
code
VPNPreDNS
When set to 0, it allows to force the use
of the Server name instead of the IP
address for the Talk2M connection. If
set to 1, Talk2M Server IP Address is
used except when using Internet Proxy.
1
0 and 1
Value 1 is highly advised in
most cases.
EnableChunkEncoding Enable chunck encoding
0
0
Disabled
1
Enabled
PPPIdleWithOut
PPP Idle time before hanging up
0
0
Check incoming
1
Check Outgoing
FwrdToWAN
WAN IP Forwarding. Allow LAN and
VPN forwarding to WAN
1
0
Disabled
1
Enabled
VPNOptPck
Not documented
0
KillLAN
Special mode which disables the eWON
LAN connection. Only modem
connection possible on eWON if this
feature is activated.
0
0
Disabled
1
Enabled
eBuddyAuth
eBuddy needs authentication
0
0
Disabled
1
Enabled
VpnFltEn
VPN protection
0
0
Disabled
1
Enabled
VpnFSa1..3
VPN protection source IP 1..3
0.0.0.0
IPv4 dotted decimal
VpnFDaS1..3
VPN protection destination IP range
start 1..3
0.0.0.0
IPv4 dotted decimal
VpnFDaE1..3
VPN protection destination IP range
end 1..3
0.0.0.0
IPv4 dotted decimal
KB-0050-0-EN-(comcfg.txt Parameters)
Page 11/24
KB Name
comcfg.txt Parameters
Type
Configuration
Since revision
11.2s0
KB Number
KB-0050-0
Build
277
Knowledge Base Information
Mod date
7/07/2016
