Chapter 3
Hardware description
3.5. LAN Switch Specifications
3.5.1. Boot process
After powering ON or requesting a reboot on the eWON COSY 131, a few moment is
required to get the LAN switch feature fully operational. (approximately 45 sec)
- Note -
When an eWON router is configured to operate a certain way, it is part of the strategy, if no
other method worked, to reboot itself. This is the ultimate decision the eWON takes in order to
restore the requested communication channels and be consistent with requested
configuration.
3.5.2. LAN Switch configuration
At the very first boot or after a reset level 2, the Ethernet ports scheme will be configured as
follows: PORT 1:
LAN
, PORT 2:
LAN
, PORT 3:
LAN
, PORT 4:
WAN
The Ethernet ports functionality can be reconfigured except for the PORT 1 which always
remain in
LAN
mode.
- Note -
Ethernet Port 1 must be used for maintenance operation such as update or recovery process.
Page 20 / 32
eWON COSY 131 | IG 022
