Chapter 4
COSY IP Address & Access to the Web
Configuration
4. COSY IP Address & Access to the Web Configuration
4.1. Factory Default IP settings
Characteristics
Value(s)
LAN IP Address
10.0.0.53
LAN Subnet Mask
255.255.255.0
Gateway
0.0.0.0
- Note -
Since FW 10.0, the WAN IP address is set by default in DHCP mode
4.2. Powering ON
Power on the unit and wait approximately 45 sec until the boot process is finished.
After a successful boot process the
USR
LED is flashing green slowly.
If the
USR
LED is flashing RED according to a given pattern, it indicates that the boot process
was interrupted due to a problem. The most frequent problem is :
•
a duplicate IP address was detected on the LAN Network
USR
LED flashing pattern is RED 1x short, 1x long
For the other LED patterns in case of error, please refer to the General Reference
Guide RG-001.
4.3. Connecting to the eWON COSY LAN IP Address
You can easily establish your first communication with your eWON COSY by using our
companion tool
eBuddy
which can be downloaded from
https://ewon.biz/support/product/download-zone/all-software
Connect one of the LAN-ports (by default, port N°1 is always a LAN port) of your COSY with
your PC point-to-point or through a network where there is no risk that the eWON's default
IP-address (10.0.0.53) would conflict with another connected device.
Page 21 / 32
eWON COSY 131 | IG 022
