Chapter 2
Safety, Environmental & Regulatory Information
original position. Pull the slide lock upwards to fix and lock the unit on the DIN rail.
•
Removing the unit from DIN-rail
Release the unit by pulling the slide lock downwards while gently tilting the unit
upwards. Free the unit by unhooking it from the upper rail edge. See
2.4.2 Mounting
instructions
The product is intended to be mounted vertically, label on the right side
DIN-rail mounting position
Wall mounting position
1
SIM card slot
2
DIN rail mounting bracket
3
Screw holes intended to receive M4 screws with an 8mm diameter head
To ensure a proper ventilation of the equipment, a free gap of at least 2 cm must be
respected in front of all upper & lower ventilation openings of the unit.
A free gap of at least 1 cm must be respected on each side of the unit.
Page 8 / 32
eWON COSY 131 | IG 022
