User Manual
EM303B General Purpose Inverter
44
Editing Parameter
Follow the viewing procedures to enter the function code first, and then edit the
parameter as per the procedures shown in Figure 4-5.
No matter it is in function setting status or operation status, after entering parameter
editing status, LSB(on the right) flashing refers to that editing the parameter is permitted.
If LSB does not flash, it indicates that editing the parameter is prohibited.
Please note that when editing the value of lower bits, if pressing
/
, the bit will
carry automatically after the present selected bit reaches its maximum value. For the
function code as F4-13 which needs to be set by bit, if pressing
/
, the bit will not
carry automatically after the present selected bit reaches its maximum value.
(
Press
)
Flashing
Bit
Flashing
Bit
Flashing
Bit
Flashing
Bit
Flashing
Bit
Flashing
Bit
Flashing
Bit
Flashing
BIt
Flashing
Bit
Flashing Bit
Flashing
Bit
Flashing
BIt
Flashing
Bit
Flashing
Bit
Flashing
Bit
(
Click
)
(
Click
)
(
Press
)
(
Press
)
(
Press
)
(
Press
)
(
Press
)
(
Click
)
(
Click
)
(
Click
)
(
Click
)
DATA
ENTER
RES
ESC
SHIFT
SHIFT
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
RES
ESC
...
Figure 4-5 Procedures of Editing Parameter
Remarks:
CLICK
in Figure 4-5 refers to press the button once and release it very quickly.
PRESS
in Figure 4-5 refers to press the button for a long time to edit the parameter.
Saving and Resetting parameter
Press
DATA
ENTER
to save the edited parameter.
If there is an unexpected editing, please press
RES
ESC
, and then LSB (on the right) flashes,
press
RES
ESC
again to return previous menu, the parameter will reset to previous value and
would not be changed. But press
DATA
ENTER
, the edited parameter will be saved, and return
previous menu. Or editing the parameter as the original value, and then press
DATA
ENTER
again.
Take F0-09 for instance, its original parameter value is 0, save or reset the parameter as
per the procedures shown in Figure 4-6.