52
MAINTENANCE
Element4 Gas Fireplaces
European
Home
.com
REMOVING AND CLEANING THE GLASS
Step 1.
Remove the four lower and two upright trim pieces which are
held in place with magnets and will lift out.
Step 2.
The front glass panel should be removed first. This panel, shown
in Figure 44, is secured with two lower clamps and two upper
clamps. Remove the retaining bolts holding the glass clamp and
remove each clamp.
Step 3.
Lift the glass panel up and swing the lower edge of the glass
panel out and over the standoff frame. (See Figure 47)
When the glass panel is clear of the standoff frame then lower
the glass panel out and set the panel securely aside.
Step 4.
In addition to the upper and lower clamps, the remaining glass
panels are held by vertical clamps. Remove all of the clamps
holding each glass panel. Remove each small glass panel and set
aside.
REMOVING THE GLASS
• Magnetized No. 2 Phillips screwdriver (not included)
• Gloves
TOOLS REQUIRED
The glass panels on this fireplace are held in place by a number
of retaining bolts and gasketed clamps. These instructions will
show you how to remove and install the clamps and glass panels.
Please read these instructions completely before proceeding.
OVERVIEW
Figure 44
Figure 45
Glass Clamp
Retaining Bolt
Figure 46
Standoff Frame
Glass Panel
Firebox Gasket
Bottom Trim
Front Glass
Panel
Upright
Trim
Figure 47
